思科认证网络工程师CCNA无线认证考试要点

相关推荐

　　CCNA无线认证旨在认可工程师在支持无线局域网方面的重要作用，包括网络工程师/管理员、无线支持专家和无线局域网项目经理。

思科认证网络工程师CCNA无线认证考试要点

　　考试说明

　　200-355 WIFUND 实施思科无线网络基础考试时间为90分钟，涵盖与CCNA无线认证相关的60-70道考题。200-355 WIFUND考试检验考生Radio Frequency(PF)及802.11等知识点，同时检测考生是否具备安装，配置，监控及基础故障排除小型企业的无线网络的能力。

　　考试要点

　　1.0 RF Fundamentals13%

　　1.1 Describe the propagation of radio waves

　　1.1.a Frequency, amplitude, phase, wavelength (characteristics)

　　1.1.b Absorption, reflection, diffraction, scattering, refraction, fading, free space path loss, multipath

　　1.2 Interpret RF signal measurements

　　1.2.a Signal strength (RSSI, Transmit power, receive sensitivity)

　　1.2.b Differentiate interference vs. noise

　　1.2.c Device capabilities (smartphones, laptops, tablets)

　　1.2.d Define SNR

　　1.3 Explain the principles of RF mathematics

　　1.3.a Compute dBm, mW, Law of 3s and 10s,

　　1.4 Describe Wi-Fi antenna characteristics

　　1.4.a Ability to read a radiation pattern chart

　　1.4.b Antenna types and uses

　　1.4.c dBi, dBd, EIRP

　　2.0 802.11 Technology Fundamentals13%

　　2.1 Describe basic Wi-Fi governance

　　2.1.a Describe regional regulatory bodies (such as, FCC / ETSI/ NTT)

　　2.1.b IEEE 802.11

　　2.1.c Wi-Fi Alliance

　　2.2 Describe usable channel and power combination

　　2.2.a Regional EIRP limitation examples

　　2.2.b ISM, UNII frequency bands

　　2.2.c Describe RRM fundamental(s)

　　2.3 Describe 802.11 fundamentals

　　2.3.a Modulation techniques

　　2.3.b Channel width

　　2.3.c MIMO / MU-MIMO

　　2.3.c (i) MRC

　　2.3.c (ii) Beam forming

　　2.3.c (iii) Spatial streams

　　2.3.d Wireless topologies

　　2.3.d (i) IBSS

　　2.3.d (ii) BSS

　　2.3.d (iii) ESS

　　2.3.e Frame types

　　2.3.e (i) Management

　　2.3.e (ii) Control

　　2.3.e (iii) Data

　　3.0 Implementing a Wireless Network16%

　　3.1 Describe the various Cisco wireless architectures

　　3.1.a Cloud

　　3.1.b Autonomous

　　3.1.c Split MAC

　　3.1.c (i) FlexConnect

　　3.1.c (ii) Centralized

　　3.1.c (iii) Converged

　　3.2 Describe physical infrastructure connections

　　3.2.a Wired infrastructures (AP, WLC, access/trunk ports, LAG)

　　3.3 Describe AP and WLC management access connections

　　3.3.a Management connections (Telnet, SSH, HTTP, HTTPS, console)

　　3.3.b IP addressing: IPv4 / IPv6

　　3.3.c Management via wireless

　　4.0 Operating a Wireless Network20%

　　4.1 Execute initial setup procedures Cisco wireless infrastructures

　　4.1.a Cloud

　　4.1.b Converged

　　4.1.c Centralized

　　4.1.d Autonomous

　　4.2 Describe the Cisco implementation of the CAPWAP discovery and join process

　　4.2.a DHCP

　　4.2.b DNS

　　4.2.c Master-controller

　　4.2.d Primary-secondary-tertiary

　　4.3 Distinguish different lightweight AP modes

　　4.4 Describe and configure the components of a wireless LAN access for client connectivity using GUI only

　　4.5 Identify wireless network and client management and configuration platform options

　　4.5.a Controller GUI and CLI

　　4.5.b Prime infrastructure

　　4.5.c Dashboard

　　4.5.d ISE

　　4.6 Maintain wireless network

　　4.6.a Perform controller configuration backups

　　4.6.b Perform code updates on controller, APs, and converged access switches

　　4.6.b (i) AireOS: boot loader (FUS), image

　　4.6.b (ii) IOS-XE: bundle, unbundle

　　4.6.b (iii) Autonomous

　　5.0 Configuration of Client Connectivity16%

　　5.1 Identify authentication mechanisms

　　5.1.a LDAP, RADIUS, local authentication, WebAuth, 802.1X,PSK

　　5.2 Configuring WLAN authentication mechanisms on the controller

　　5.2.a WebAuth, 802.1X, PSK

　　5.2.b TKIP deprecation

　　5.3 Configure client connectivity in different operating systems

　　5.3.a Android, MacOS, iOS, Windows

　　5.4 Describe roaming

　　5.4.a Layer 2 and Layer 3

　　5.4.b Intracontroller and intercontroller

　　5.4.c Centralized mobility

　　5.4.d Converged mobility

　　5.5 Describe wireless guest networking

　　5.5.a Anchor controller

　　5.5.b Foreign controller

　　6.0 Performing Client Connectivity Troubleshooting13%

　　6.1 Validating WLAN configuration settings at the infrastructure side

　　6.1.a Security settings

　　6.1.b SSID settings

　　6.2 Validating AP infrastructure settings

　　6.2.a Port level configuration

　　6.2.b Power source

　　6.2.c AP and antenna orientation and position

　　6.3 Validate client settings

　　6.3.a SSID

　　6.3.b Security

　　6.3.c Device driver version

　　6.4 Employ appropriate controller tools to assist troubleshooting

　　6.4.a GUI logs

　　6.4.b CLI show commands

　　6.4.c Monitor pages

　　6.4.c (i) CleanAir (controller GUI)

　　6.2 Identify appropriate third-party tools to assist troubleshooting

　　6.2.a OS-based Client utilities

　　6.2.b Wi-Fi scanners

　　6.2.c RF mapping tool

　　7.0 Site Survey Process9%

　　7.1 Describe site survey methodologies and their purpose

　　7.1.a Offsite (predictive / plan)

　　7.1.b Onsite

　　7.1.b (i) Predeployment (AP on a stick)

　　7.1.b (ii) Post deployment (validation)

　　7.2 Describe passive and active site surveys

　　7.3 Identify proper application of site survey tools

　　7.3.a Spectrum analyzer

　　7.3.b Site surveying software

　　7.4 Describe the requirements of client real-time and non-real-time applications

【思科认证网络工程师CCNA无线认证考试要点】相关文章：

思科CCNA认证网络工程师学习指南10-30

思科网络工程师认证考试09-07

思科网络工程师认证考试方法08-28

思科认证考试报考指南08-19

2017思科网络工程师认证考试试题09-06