思科认证CCIE安全笔试考试大纲

相关推荐

思科认证CCIE安全笔试考试大纲

　　思科CCIE安全笔试考试(400-251)v5.0，考试时间为2小时，考试题目90-110道，验证专业人士是否具备阐释，设计，实施，操作和故障排除的复合网络安全技能及解决方案。考生必须理解网络安全所需，以及网络安全部件之间如何互相操作，并将其翻译成设备配置语言。闭卷考试，考场中不允许带任何参考资料。

思科认证CCIE安全笔试考试大纲

　　1.0 Perimeter Security and Intrusion Prevention 21% 23%

　　1.1 Describe, implement, and troubleshoot HA features on Cisco ASA and Cisco FirePOWER Threat Defense (FTD)

　　1.2 Describe, implement, and troubleshoot clustering on Cisco ASA and Cisco FTD

　　1.3 Describe, implement, troubleshoot, and secure routing protocols on Cisco ASA and Cisco FTD

　　1.4 Describe, implement, and troubleshoot different deployment modes such as routed, transparent, single, and multicontext on Cisco ASA and Cisco FTD

　　1.5 Describe, implement, and troubleshoot firewall features such as NAT (v4,v6), PAT, application inspection, traffic zones, policy-based routing, traffic redirection to service modules, and identity firewall on Cisco ASA and Cisco FTD

　　1.6 Describe, implement, and troubleshoot IOS security features such as Zone-Based Firewall (ZBF), application layer inspection, NAT (v4,v6), PAT and TCP intercept on Cisco IOS/IOS-XE

　　1.7 Describe, implement, optimize, and troubleshoot policies and rules for traffic control on Cisco ASA, Cisco FirePOWER and Cisco FTD

　　1.8 Describe, implement, and troubleshoot Cisco Firepower Management Center (FMC) features such as alerting, logging, and reporting

　　1.9 Describe, implement, and troubleshoot correlation and remediation rules on Cisco FMC

　　1.10 Describe, implement, and troubleshoot Cisco FirePOWER and Cisco FTD deployment such as in-line, passive, and TAP modes

　　1.11 Describe, implement, and troubleshoot Next Generation Firewall (NGFW) features such as SSL inspection, user identity, geolocation, and AVC (Firepower appliance)

　　1.12 Describe, detect, and mitigate common types of attacks such as DoS/DDoS, evasion techniques, spoofing, man-in-the-middle, and botnet

　　2.0 Advanced Threat Protection and Content Security 17% 19%

　　2.1 Compare and contrast different AMP solutions including public and private cloud deployment models

　　2.2 Describe, implement, and troubleshoot AMP for networks, AMP for endpoints, and AMP for content security (CWS, ESA, and WSA)

　　2.3 Detect, analyze, and mitigate malware incidents

　　2.4 Describe the benefit of threat intelligence provided by AMP Threat GRID

　　2.5 Perform packet capture and analysis using Wireshark, tcpdump, SPAN, and RSPAN

　　2.6 Describe, implement, and troubleshoot web filtering, user identification, and Application Visibility and Control (AVC)

　　2.7 Describe, implement, and troubleshoot mail policies, DLP, email quarantines, and SenderBase on ESA

　　2.8 Describe, implement, and troubleshoot SMTP authentication such as SPF and DKIM on ESA

　　2.9 Describe, implement, and troubleshoot SMTP encryption on ESA

　　2.10 Compare and contrast different LDAP query types on ESA

　　2.11 Describe, implement, and troubleshoot WCCP redirection

　　2.12 Compare and contrast different proxy methods such as SOCKS, Auto proxy/WPAD, and transparent

　　2.13 Describe, implement, and troubleshoot HTTPS decryption and DLP

　　2.14 Describe, implement, and troubleshoot CWS connectors on Cisco IOS routers, Cisco ASA, Cisco AnyConnect, and WSA

　　2.15 Describe the security benefits of leveraging the OpenDNS solution.

　　2.16 Describe, implement, and troubleshoot SMA for centralized content security management

　　2.17 Describe the security benefits of leveraging Lancope

　　3.0 Secure Connectivity and Segmentation 17% 19%

　　3.1 Compare and contrast cryptographic and hash algorithms such as AES, DES, 3DES, ECC, SHA, and MD5

　　3.2 Compare and contrast security protocols such as ISAKMP/IKEv1, IKEv2, SSL, TLS/DTLS, ESP, AH, SAP, and MKA

　　3.3 Describe, implementc and troubleshoot remote access VPN using technologies such as FLEXVPN, SSL-VPN between Cisco firewalls, routers, and end hosts

　　3.4 Describe, implement, and troubleshoot the Cisco IOS CA for VPN authentication

　　3.5 Describe, implement, and troubleshoot clientless SSL VPN technologies with DAP and smart tunnels on Cisco ASA and Cisco FTD

　　3.6 Describe, implement, and troubleshoot site-to-site VPNs such as GETVPN, DMVPN and IPsec

　　3.7 Describe, implement, and troubleshoot uplink and downlink MACsec (802.1AE)

　　3.8 Describe, implement, and troubleshoot VPN high availability using Cisco ASA VPN clustering and dual-hub DMVPN deployments

　　3.9 Describe the functions and security implications of cryptographic protocols such as AES, DES, 3DES, ECC, SHA, MD5, ISAKMP/IKEv1, IKEv2, SSL, TLS/DTLS, ESP, AH, SAP, MKA, RSA, SCEP/EST, GDOI, X.509, WPA, WPA2, WEP, and TKIP

　　3.10 Describe the security benefits of network segmentation and isolation

　　3.11 Describe, implement, and troubleshoot VRF-Lite and VRF-Aware VPN

　　3.12 Describe, implement, and troubleshoot microsegmentation with TrustSec using SGT and SXP

　　3.13 Describe, implement, and troubleshoot infrastructure segmentation methods such as VLAN, PVLAN, and GRE

　　3.14 Describe the functionality of Cisco VSG used to secure virtual environments

　　3.15 Describe the security benefits of data center segmentation using ACI, EVPN, VXLAN, and NVGRE

　　4.0 Identity Management, Information Exchange, and Access Control 22% 24%

　　4.1 Describe, implement, and troubleshoot various personas of ISE in a multinode deployment

　　4.2 Describe, implement, and troubleshoot network access device (NAD), ISE, and ACS configuration for AAA

　　4.3 Describe, implement, and troubleshoot AAA for administrative access to Cisco network devices using ISE and ACS

　　4.4 Describe, implement, verify, and troubleshoot AAA for network access with 802.1X and MAB using ISE.

　　4.5 Describe, implement, verify, and troubleshoot cut-through proxy/auth-proxy using ISE as the AAA server

　　4.6 Describe, implement, verify, and troubleshoot guest life cycle management using ISE and Cisco network infrastructure

　　4.7 Describe, implement, verify, and troubleshoot BYOD on-boarding and network access flows with an internal or external CA

　　4.8 Describe, implement, verify, and troubleshoot ISE and ACS integration with external identity sources such as LDAP, AD, and external RADIUS

　　4.9 Describe ISE and ACS integration with external identity sources such as RADIUS Token, RSA SecurID, and SAML

　　4.10 Describe, implement, verify, and troubleshoot provisioning of AnyConnect with ISE and ASA

　　4.11 Describe, implement, verify, and troubleshoot posture assessment with ISE

　　4.12 Describe, implement, verify, and troubleshoot endpoint profiling using ISE and Cisco network infrastructure including device sensor

　　4.13 Describe, implement, verify, and troubleshoot integration of MDM with ISE

　　4.14 Describe, implement, verify, and troubleshoot certificate based authentication using ISE

　　4.15 Describe, implement, verify, and troubleshoot authentication methods such as EAP Chaining and Machine Access Restriction (MAR)

　　4.16 Describe the functions and security implications of AAA protocols such as RADIUS, TACACS+, LDAP/LDAPS, EAP (EAP-PEAP, EAP-TLS, EAP-TTLS, EAP-FAST, EAP-TEAP, EAP- MD5, EAP-GTC), PAP, CHAP, and MS-CHAPv2

　　4.17 Describe, implement, and troubleshoot identity mapping on ASA, ISE, WSA and FirePOWER

　　4.18 Describe, implement, and troubleshoot pxGrid between security devices such as WSA, ISE, and Cisco FMC

　　5.0 Infrastructure Security, Virtualization, and Automation 13% 15%

　　5.1 Identify common attacks such as Smurf, VLAN hopping, and SYNful knock, and their mitigation techniques

　　5.2 Describe, implement, and troubleshoot device hardening techniques and control plane protection methods, such as CoPP and IP Source routing.

　　5.3 Describe, implement, and troubleshoot management plane protection techniques such as CPU and memory thresholding and securing device access

　　5.4 Describe, implement, and troubleshoot data plane protection techniques such as iACLs, uRPF, QoS, and RTBH

　　5.5 Describe, implement, and troubleshoot IPv4/v6 routing protocols security

　　5.6 Describe, implement, and troubleshoot Layer 2 security techniques such as DAI, IPDT, STP security, port security, DHCP snooping, and VACL

　　5.7 Describe, implement, and troubleshoot wireless security technologies such as WPA, WPA2, TKIP, and AES

　　5.8 Describe wireless security concepts such as FLEX Connect, wIPS, ANCHOR, Rogue AP, and Management Frame Protection (MFP)

　　5.9 Describe, implement, and troubleshoot monitoring protocols such as NETFLOW/IPFIX, SNMP, SYSLOG, RMON, NSEL, and eSTREAMER

　　5.10 Describe the functions and security implications of application protocols such as SSH, TELNET, TFTP, HTTP/HTTPS, SCP, SFTP/FTP, PGP, DNS/DNSSEC, NTP, and DHCP

　　5.11 Describe the functions and security implications of network protocols such as VTP, 802.1Q, TCP/UDP, CDP, LACP/PAgP, BGP, EIGRP, OSPF/OSPFv3, RIP/RIPng, IGMP/CGMP, PIM, IPv6, and WCCP

　　5.12 Describe the benefits of virtualizing security functions in the data center using ASAv, WSAv, ESAv, and NGIPSv

　　5.13 Describe the security principles of ACI such as object models, endpoint groups, policy enforcement, application network profiles, and contracts

　　5.14 Describe the northbound and southbound APIs of SDN controllers such as APIC-EM

　　5.15 Identify and implement security features to comply with organizational security policies, procedures, and standards such as BCP 38, ISO 27001, RFC 2827, and PCI-DSS

　　5.16 Describe and identify key threats to different places in the network (campus, data center, core, edge) as described in Cisco SAFE

　　5.17 Validate network security design for adherence to Cisco SAFE recommended practices

　　5.18 Interpret basic scripts that can retrieve and send data using RESTful API calls in scripting languages such as Python

　　5.19 Describe Cisco Digital Network Architecture (DNA) principles and components.

　　6.0 Evolving Technologies 10% N/A

　　6.1 Cloud

　　6.1.a Compare and contrast Cloud deployment models

　　6.1.a [i] Infrastructure, platform, and software services (XaaS)

　　6.1.a [ii] Performance and reliability

　　6.1.a [iii] Security and privacy

　　6.1.a [iv] Scalability and interoperability

　　6.1.b Describe Cloud implementations and operations